Reportedly, yesterday, we held a special negotiation meeting with core Russian clients, conducting in-depth consultations on the performance parameters, product adaptability and cooperation details of four-wheel all-terrain vehicles (ATVs) and eight-wheel all-terrain vehicles. Finally, a preliminary cooperation consensus was reached - the client plans to place an initial order for two four-wheel ATVs and two eight-wheel ATVs. After sample acceptance, both parties will establish a long-term and stable supply cooperation, with the expected monthly supply volume reaching 200-400 units in the follow-up, marking that our all-terrain vehicle products have officially opened up the large-scale supply channel for the Russian market.
At the negotiation meeting, our technical team held four rounds of detailed communications with Russian clients on the core performance, key parameters and applicable scenarios of the two types of all-terrain vehicles, fully responding to the clients' needs for product practicality, stability and adaptability in extreme environments. Considering Russia's vast territory, complex terrain, cold and snowy winters, and numerous mountainous and swampy areas, we focused on introducing the core advantages of the two products. At the same time, combined with the clients' needs, we clearly stated that the eight-wheel all-terrain vehicle will undergo performance upgrades to better adapt to its usage scenarios.
Among them, the four-wheel all-terrain vehicle has both power and flexibility in parameter configuration. Its overall dimensions are 2000mm in length, 1050mm in width and 1720mm in height, with a chassis height of 280mm, which can effectively cope with collisions on complex roads and ensure driving safety. The vehicle has a maximum load capacity of 380kg and a top speed of 100km/h, supporting three-speed adjustment of 45km/h, 65km/h and 100km/h, with a 0-100km/h acceleration time of only 4 seconds and rapid power response. In terms of adaptability to complex environments, the vehicle can wade in water up to 500mm deep for 30 minutes continuously, with a turning radius of only 3.5m, allowing flexible travel in narrow sections. In terms of power system, the vehicle is equipped with 4 motors of 3000W each, supporting switching between four-wheel or two-wheel drive, matched with a 150Ah battery, with a cruising range of 170km. It is equipped with an LED instrument panel for convenient and intuitive operation, and adopts electronic braking to further improve driving safety, suitable for multiple scenarios such as outdoor adventures and light-duty operations.
In terms of the eight-wheel all-terrain vehicle, to meet the Russian clients' demand for driving speed, we clearly stated that the product will be upgraded and modified: the original 2 or 4 motors will be upgraded to 8 motors, and the top speed will be synchronously increased from 7km/h to 30km/h, balancing power and driving efficiency. After upgrading, the eight-wheel all-terrain vehicle has an overall dimension of 2700mm in length, 1580mm in width and 1200mm in height, and a carriage dimension of 2620mm in length, 1420mm in width and 430mm in height, with a maximum load capacity of 1500kg and a cargo box height from the ground of 740mm, facilitating cargo loading and unloading. The vehicle adopts an 8-wheel shaft drive (direct connection shaft) mode, equipped with brushless motors, with a single motor power of 1200W. The 8 motors work together to provide stronger power output. In terms of off-road performance, the vehicle has all-terrain adaptability, with a climbing angle of -40° and high-low gear adjustment, matched with 8 500-12 herringbone tires (with inner tubes), which have strong grip and can easily cope with complex road conditions such as mountains, mud and snow. It adopts electromagnetic braking with anti-slip function, with an overall weight of 890kg (including battery), equipped with two sets of 60V58A lead-acid batteries, and can be optionally equipped with lithium batteries, with a cruising time of up to 4 hours, suitable for multiple fields such as heavy-duty operations and emergency rescue.
The Russian clients highly recognized the parameter configuration and adaptability of the two products, and especially expressed satisfaction with the upgrade plan of the eight-wheel all-terrain vehicle, believing that the upgraded products are more in line with the actual usage needs in the local area in terms of speed and power, and can effectively improve work efficiency. After multiple rounds of consultations, both parties reached an agreement on product specifications, delivery cycle, quality standards and after-sales service. The client decided to initially purchase two four-wheel ATVs and two eight-wheel ATVs as samples. After test and acceptance, the mass purchase plan will be officially launched. It is expected that the monthly supply volume will be stably maintained at 200-400 units in the follow-up, and the cooperation scale will be gradually expanded.
This cooperation with Russian clients is not only an important breakthrough in the overseas market expansion of our all-terrain vehicle products, but also a full recognition of our product technical strength and quality level. In the future, we will accelerate the upgrading and modification of the eight-wheel all-terrain vehicle, strictly control the production quality in accordance with the established parameters, further optimize the product configuration according to the needs of the Russian market, ensure the stability and timeliness of mass supply, deepen cooperation with Russian clients, expand more overseas market space, promote the global development of China's all-terrain vehicle equipment, and achieve mutual benefit and win-win results.
For further inquiries or cooperation negotiations, please contact us via the following channels:
Email: runtongeasy@outlook.com
WhatsApp: +86 13063830898
